UF Systems in Delhi NCR
UF systems in Delhi NCR for RO pre-treatment, STP polish and process water.
Ultrafiltration systems for RO pre-treatment and reuse in Delhi NCR
Ultrafiltration (UF) is a physical barrier for suspended solids, colloids and many microorganisms. Jaljiwan UF systems, built in New Delhi, work as standalone clarification units, as RO pre-treatment for low SDI, and as tertiary polishers on STP and ETP reuse lines across Delhi NCR.
UF system enquiries from Delhi NCR split three ways: protect an industrial or commercial RO, polish STP treated water for flushing or gardening, or clarify process water where sand filters take too much space. We size flux and recovery from turbidity and organics. A neighbour’s skid is not a design basis.
Hollow-fibre modules sit on a compact skid with auto backwash and CIP connections. Plant rooms in Gurugram hotels and Noida factories often cannot spare a clarifier hall. UF filtrate is steady even when monsoon turbidity jumps, which is why we use it as RO pre-treatment when SDI must stay low.
After start-up we train operators on transmembrane pressure and backwash. CIP chemistry follows the foulant, not a generic acid wash. Jaljiwan AMC and spare support run from Dwarka. If your RO fouls after every monsoon, a UF plant in front is often the fix, not another set of membranes.
Key Features
Hollow-fibre modules
Inside-out or outside-in configurations as duty requires.
Auto backwash
Programmed backwash and chemical-enhanced backwash options.
Low chemical intensity
Compared with conventional clarifiers for many applications.
Compact skids
Containerised and plant-room friendly layouts.
RO pre-treatment
Targets low silt density index for membrane protection.
Reuse polishing
Pairs with disinfection for non-potable reuse streams.
Benefits
- Consistent filtrate quality despite variable raw turbidity.
- Smaller footprint than many conventional clarification schemes.
- Extends RO membrane life by reducing fouling load.
- Supports water reuse programmes on campuses and factories.
Applications
How Jaljiwan delivers UF Systems in Delhi NCR
UF Systems specifications
Final figures are confirmed after water analysis and a site survey in Delhi NCR.
| Pore size (typical) | 0.01–0.1 µm class membranes |
|---|---|
| Capacity | 1 m³/h – multi-MLD modular |
| Recovery | Often 85–95% depending on feed |
| MOC | uPVC / SS piping options |
| Control | PLC with auto backwash sequences |
| CIP | Alkali / acid CIP as required |
Industries in Delhi NCR that use UF Systems
UF Systems photos from Jaljiwan projects
You may also need
FAQs about UF Systems in Delhi NCR
Yes. Jaljiwan builds ultrafiltration plants in Dwarka for RO pre-treatment, STP tertiary and process water across Delhi, Gurugram and Noida.
No. A UF system is not desalination. Pair it with an RO plant when TDS must come down. UF takes out solids, colloids and many microbes.
It depends on feed fouling. Many UF plants run CEB or CIP when transmembrane pressure rises, not on a blind calendar.
On many compact Delhi NCR sites, yes, especially where footprint and filtrate quality matter more than a large filter hall.
Yes. STP tertiary UF is common when treated sewage will go to flushing or gardening and you need a stable polish after biology.
Yes. Ultrafiltration for RO pre-treatment targets a low silt density index so industrial and commercial RO membranes last longer.
From about 1 m³/h up to modular multi-MLD trains. We size flux and recovery from your turbidity and organics, not from a neighbour’s skid.
We support AMC with housings, cartridges and related parts from Dwarka. Module type is confirmed from nameplates before we quote a replacement.